REVIEWED: 4 GREAT BIKE REPAIR STANDS | SIMPLIFY MAINTENANCE

A FEW GOOD BICYCLE WORK STAND REVIEWS: FOUR CHEAP OPTIONS

When you’re doing any sort of maintenance on your bicycle, gravity is the enemy.

It’s really difficult to pull parts, troubleshoot an issue, or even perform a tune-up without elevating the bike.

You’ve probably noticed that most bike shops have these big stands that clamp around the seatpost. They make life so much easier!

You might be surprised to know that it’s pretty easy to find a good, affordable bicycle repair stand that’s close to pro quality. Not all stands are equal, but there are some gems if you do your research.

I’ve used a bunch of stands in my cycling life. Some were great, some frankly sucked.

This article is written to help any cyclist searching for a decently priced cycle work stand for repairs and tune-ups. Ready? Let’s roll!


SHOULD I MAKE A DIY BIKE REPAIR STAND? IS IT CHEAPER?

I get asked this question a lot! I think it’s because people tend to check out a bike stand, see the price tag, and think, “Hey I could make one for a lot less!”

I hate to burst your bubble, but every DIY bicycle work stand project I’ve seen has ended up costing almost as much as a store-bought item. And they’re often less versatile too.​

That’s not to dissuade you from being crafty. If you’ve got a plan, go for it! Just be 100% sure that it won’t cause damage to your bike.

One suggestion: if you go the DIY route, save yourself some hassle and at least buy a pre-built bike repair stand clamp! It’s just a way easier route. Just my two cents.


PARK TOOLS PCS-10: AMONG THE BEST BIKE REPAIR STANDS AVAILABLE

Step into any bike shop and there’s a good chance you’ll see one: a blue and black stand in the repair area. A lot of professionals swear by Park Tools stands (and their tools as well.)

Their pro-quality line tends to be expensive. However, Park Tools recognized the call for a more affordable, home mechanic option, and the PCS-10 is the result.​

It’s got a lot of enviable features. It folds up to a very small size, making it easy to stow in a closet.​

Despite that portability, it’s a very stable stand, with twin legs that provide a three-point system. Even with a fairly heavy bike, it inspires confidence.​

The cam style clamp can fit almost any size of tubing, and the head rotates 360 degrees, so you can attach to seatpost or frame. The clamp itself has adjustable pressure in case you’re worried about frame damage.

It features several quick-release clamps so you can adjust the height on the fly.

Available for well under $200, the PCS-10 is a well-built bargain. It’s an almost pro quality bicycle maintenance stand that I’d consider before anything else.

Pros: Great brand, foldable and adjustable, very stable, reasonable price

Cons: Not quite as durable as the pro quality bike stands from Park Tools


FEEDBACK SPORTS: A SUPER DURABLE BICYCLE WORK STAND WITH GREAT REVIEWS

If there’s one thing to know about the Feedback Sports recreational bike stand, it’s this: it can take a beating.

It’s a dirt simple and highly affordable bike maintenance stand that will last through years of use and abuse.

The frame is made from sturdy steel. It’s not light, but it’s strong! It’s rated for bikes up to at least 60 pounds.

The dual legs are attached to the frame. When you want to fold it up, you just remove the pin and swing the legs up. The clamp head also folds down, making it easy to stash in the corner of a closet.

It has some movement to it, but it’s highly stable. One thing I love about this stand is its ability to work on uneven surfaces. I’ve used it on concrete floors and dirt roads, and it always seems rock solid.

The clamp can be rotated 360 degrees, so it’s great for clamping onto any part of the frame.

My only beefs: the clamp is at a fixed height, and it has a spinner knob to tighten, which is a bit time consuming. Really, though, these are very minor concerns.

The price tag is excellent too, sitting at around $125 at the time of writing.

It’s one of my favourite bicycle repair stands and it has great reviews all around. Definitely check this puppy out!

Pros: Highly stable on all surfaces, almost indestructible, great price tag, good brand

Cons: Fixed height clamp, spinner knob isn’t convenient to tighten


PEDRO’S: ONE OF THE BEST PORTABLE BIKE REPAIR STANDS AROUND

I’m a sucker for unique, helpful features. Pedro’s folding bicycle maintenance stand has a big one.

You’ll probably notice the ‘trigger’ looking apparatus on the clamp head. Unlike a lot of stands that rely on a release hinge or a spinner, this one uses the trigger to tighten the clamp!

It’s a super simple and intuitive system, and one of those things where you wonder how you got along without it before.

Beyond that neat selling feature, this stand is impressive. Pedro’s is a cycling company, and this item is built to withstand the rigours of regular use. All of the stress points are reinforced.

It’s made from aluminum alloy, making it a bit lighter. It sits on a three-piece leg system and it’s remarkably stable for a folder.

Speaking of folding, this stand is simply tiny when folded up. The head tilts down and the legs slide up. It’ll easily fit in the trunk of a car.

A quick release clamp on the neck allows you to adjust the height to perfection. The clamp head rotates 360 degrees too, so you can use it with virtually any bike.

It’s a bit pricier than some other options, but Pedro’s has made one of the top bike repair stands with rave reviews from mechanics and home hobbyists alike. I’d urge you to consider this one.

Pros: Trigger clamp tightener is awesome, folds up to tiny size, incredibly durability

Cons: The most expensive on this list


I’VE GOT A WORKBENCH…

If you have a workbench in your shop and you don’t mind sacrificing portability, a fantastic way to save money is to install a bench-mounted bicycle repair clamp.

They cost a lot less than a full stand, and if installed properly they’re every bit as effective.

Just be aware that sometimes the ability to move around is pretty valuable, especially if you don’t have a ton of space in your workshop to begin with.

If you have a workbench already and it makes sense for you, I’d definitely forego buying a full stand and just get a good, sturdy clamp instead.

Another alternative is the wall mount bicycle repair stand. It’s a similar idea (and price tag), with the clamp extending out from the wall itself. It all just depends on your space and what you have to work with!